The EZee Life™ 24” bariatric wheelchair is a heavy duty wheelchair with a weight capacity of 400lbs., steel folding frame, removable arm rests removable foot rests, solid tires and embossed light weight pvc upholstery.

Standard wheelchairs are cost effective excellent choices as loaner chairs for stores and businesses and quite suitable for institutional use. The rugged design of these wheelchairs makes them last for many years with only minor maintenance issues common among all wheelchairs to deal with.

Although most people who use wheelchairs for long periods of time throughout the day will usually opt for lightweight wheelchairs, standard wheelchairs are perfectly suitable for short excursions and basic transportation needs.

Because this model of wheelchair can be propelled by the user or pushed by a care giver, it will provide both independent and dependent mobility.

Product image for illustration purposes only. Actual product may vary

Choosing the right size wheelchair is important to the comfort and functionality of the wheelchair user. Wheelchairs are generally sized by seat dimensions. When a wheelchair is described as an 18" wheelchair it will have an 18" seat width.

If the wheelchair is too wide the user will have difficulty propelling the wheelchair and manoeuvring through tight areas may be impossible. If the wheelchair is too narrow the user's outer thighs will be pushed against the armrests of the wheelchair causing discomfort and in extreme cases skin breakdown.

The first step in determining the needed seat width for a user is to measure the width of their hips, at their widest point, while they are sitting.

The general rule of thumb is to add 2" to the user's width to determine the wheelchair seat size. However, if the user will not normally be going out wearing a heavy coat this added 2" may not be needed. Ideally, the seat width of the wheelchair should be as narrow as possible without causing pressure on the user's hips.

Wheelchairs are manufactured in 2" increments of seat width (14", 16", 18", etc.) with 16" being considered a narrow adult size and 18" being a normal seat width. Odd sizes (15", 17", 19", etc) are available in the much higher priced custom wheelchairs.

All FDM EZee Life™ wheelchairs come standard with swing-away, removable footrests with flip-up, adjustable height footplates.

Adjustment-When adjusted properly, the distance from the top of the seating surface to the top of the footplate should equal the distance from the back of the knee when seated to the bottom of the foot. Measurements should be taken while the user is wearing their most common footwear.

Elevating leg rests are an option on all FDM EZ-Life wheelchairs and allow the user's feet to be supported when the knee is flexed at different angles. Elevating leg rests also include adjustable height flip-up footplates and can be swung away or removed as needed. Additionally, elevating leg rests each have an adjustable calf pad that supports the back the user's calf.

Elevating leg rests are designed for use by people who for some reason must keep their leg/legs straight or have limited flexion in the knee that prevents bending far enough for the use of standard footplates. They can be used singularly if only one leg is affected but must be purchased in pairs.

Adjustment- Due to the way the knee flexes a user's leg length effectively lengthens when straightened and this makes adjustment of the footplates a little tricky. We recommend that the user sits in the wheelchair and has a caregiver lift the leg rest to the most common expected angle of use and then adjust the footplates to a comfortable position.